Share some CCNP 300-135 exam questions and answers below.
What is the solution of the fault condition?
A. Under the BGP process,enter the bgp redistribute-internal command
B. Under the BGP process, bgp confederation identifier 65001 command
C. Delete the current BGP process and reenter all of the commands using 65002 as theAS number.
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command.
Answer: D
What is the MTU¡¯s size in a GRE tunnel?
A. 1630
B. 1476
C. 1500
D. 1900
Answer: B
Ticket 5 R1ACL
TROUBLE TICKET STATEMENT:
The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).
show run by yourself to obtain the following information:
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.
Configuration on R1
! interface Serial0/0/0/1
description link to ISP
ip address 209.65.200.224 255.255.255.252
ip access-group edge_security in
ip nat outside
ip virtual-reassembly
ntp brasdcast client
net broadcast key 1
no cdp enable
!! ip access-list nat_traffic permit 10.1.0.0 0.0.255.255
ip access-list nat_traffic permit 10.2.0.0 0.0.255.255
! ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any
ip access-list edge_security deny ip 172.16.0.0 0.15.255.255 any
ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any
ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any
ip access-list edge_security permit ip host 209.65.200.241 any
On which device is the fault condition located?
A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
Answer: A
What is the solution of the fault condition?
A. Under the BGP process,enter the bgp redistribute-internal command
B. Under the BGP process, bgp confederation identifier 65001 command
C. Delete the current BGP process and reenter all of the commands using 65002 as the AS number.
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command.
Answer: D
What is the solution of the fault condition?
A. Under the ip access-list edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command
B. Under the interface Serial0/0/1 enter the ip access-group edge_security out command.
C. Under the ip access-list edge_security configuration delete the deny ip 10.0.0.0 0.255.255.255 any command
D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access group edge_security out command
Answer: A
The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: G
300-135 TSHOOT Troubleshooting and Maintaining Cisco IP Networks can help you to pass the exam, and we can guarantee 100% pass rate. So you will have no losses.Certpark is a website which can give much convenience and meet the needs and achieve dreams for many people participating IT certification exams. If you are still worrying about passing some IT certification exams, please choose Certpark to help you.
Today, I will tell you a good way to pass the exam which is to choose Certpark 300-135 TSHOOT Troubleshooting and Maintaining Cisco IP Networks. It can help you to pass the exam, and we can guarantee 100% pass rate. If you do not pass, we will guarantee to refund the full purchase cost. So you will have no losses.Certpark can provide a shortcut for you and save you a lot of time and effort. Certpark will provide good 300-135 TSHOOT Troubleshooting and Maintaining Cisco IP Networks and help you pass Cisco certification 300-135 exam.

No comments:
Post a Comment